New beta builder 09-22 - resolves registration issues
by Kenneth Holst · in Torque X 2D · 09/23/2008 (10:31 am) · 14 replies
Grab it here!
This should fix the reported issue of not being able to register. Thanks for being patient guys!
This should fix the reported issue of not being able to register. Thanks for being patient guys!
#3
I've uninstalled the old one and install the new beta builder, and still receiving 0 Days Remaining warning.
Any assistance is appreaciated.
09/27/2008 (12:05 pm)
I'm still having problem with this "DMZH-PZPM-MAK2-P949" registration key. When entered, it gave me an "invalid registration key entered" message.I've uninstalled the old one and install the new beta builder, and still receiving 0 Days Remaining warning.
Any assistance is appreaciated.
#4
09/28/2008 (6:36 am)
I still get 'invalid registration key entered' as well. Is a different key required for this build? 
#5
John K.
09/28/2008 (3:25 pm)
Yep, I think there's a problem with the key itself.; it may have expired. We're looking into this.John K.
#6
Any word on when this may get fixed - I really would like to try this out again.
09/29/2008 (9:42 am)
I uninstalled the old beta and reinstalled this sept 22 build, and still have problems with the registration key. Still getting the "invalid registration key entered" message, and have 0 days remaining warning, so am unable to even try the builder.Any word on when this may get fixed - I really would like to try this out again.
#7
09/29/2008 (4:34 pm)
New build coming out right now, with fixed key. 
#8
I tried my indie license for TXB, I tried DMZH-PZPM-MAK2-P949 and I tried the "Offline Registration ID".
But I always get 'invalid registration key entered'.
10/21/2008 (12:16 pm)
What key do I have to enter?I tried my indie license for TXB, I tried DMZH-PZPM-MAK2-P949 and I tried the "Offline Registration ID".
But I always get 'invalid registration key entered'.
#9
10/21/2008 (9:24 pm)
Why do you have to post your serial number..
#10
John K.
10/21/2008 (10:34 pm)
I believe that the Beta period for the 3D Builder has expired and the ignition keys no longer work. That usually means only one thing ;) Also, the 2D and 3D Builders will have different ignition keys.John K.
#11
@Aivan Monceller
This was not my serial number...
@John
So: because my public beta version that you offer at your torquexbook-site has to run without a serial number ("you have 30 days left"...), does this mean that the final version will be released within a month?
10/21/2008 (11:14 pm)
Quote:I believe that the Beta period for the 3D Builder has expiredYes, it seems so because if I download "Torque X 3D Open Beta" that is offered on my account page under "Downloadable Products You Own", TX2D 1.5 will be downloaded :(
@Aivan Monceller
This was not my serial number...
@John
So: because my public beta version that you offer at your torquexbook-site has to run without a serial number ("you have 30 days left"...), does this mean that the final version will be released within a month?
#12
10/22/2008 (4:22 am)
I have the same question how will I register the 3D builder I have a registration key for the 2D builder.. I used the ignition file but nothing happens.
#14
I can't get any of the four or five TX Builder programs to run (Aug 8, Sep 10, Sep 22, Sep 29, etc.) because they all universally reject the serial numbers, and even when I did once in the past it simply doesn't operate in any useful way and posts I've left on the subject have been effectively just "we'll fix it eventually" responses.
Sigh...
All I want to do today is figure out how to use a darned RAW heightmap for terrain. Since there are absolutely no examples of this anywhere to be found, and what I've tried so far crashes horribly, I thought I'd see if the 3D builder could show me how to set up the XML file for RAW terrains, but... And then I find a forum Thread about having problems with RAW terrains that's over a month old without a single response, which is par for the course, I guess...
Can someone please either provide some information about how to use RAW terrain or how to get the 3D Builder running so I can see what kind of XML it generates?
Please?
[EDIT] I thought I figured it out by looking in the Complete Guide to TorqueX book's downloadable source code, but I was apparently wrong. That code works well enough just so long as you never move the player (in the FPS demo). Back to the drawing board, I guess.
11/06/2008 (7:20 pm)
Wow, I've just about lost all hope here :(I can't get any of the four or five TX Builder programs to run (Aug 8, Sep 10, Sep 22, Sep 29, etc.) because they all universally reject the serial numbers, and even when I did once in the past it simply doesn't operate in any useful way and posts I've left on the subject have been effectively just "we'll fix it eventually" responses.
Sigh...
All I want to do today is figure out how to use a darned RAW heightmap for terrain. Since there are absolutely no examples of this anywhere to be found, and what I've tried so far crashes horribly, I thought I'd see if the 3D builder could show me how to set up the XML file for RAW terrains, but... And then I find a forum Thread about having problems with RAW terrains that's over a month old without a single response, which is par for the course, I guess...
Can someone please either provide some information about how to use RAW terrain or how to get the 3D Builder running so I can see what kind of XML it generates?
Please?
[EDIT] I thought I figured it out by looking in the Complete Guide to TorqueX book's downloadable source code, but I was apparently wrong. That code works well enough just so long as you never move the player (in the FPS demo). Back to the drawing board, I guess.
Associate David Montgomery-Blake
David MontgomeryBlake