Doit! v0.8.3 is released! ...Super Simple Exporting from 3dsMax !!!
by TheGasMan · 03/04/2009 (1:14 pm) · 31 comments
Doit! v083 is now released for 3dsMax 7,8,9,2008 and 2009 !!!!**
If you don't know about "Doit!"..read my last blog!
...click image to go to Doit!'s store page!...
I have stuck to my word on the Early Adopter pricing of $10indy/$20commercial. For a few days at least...I will explain...
I have been asked this by several people: "why is it so cheap when it saves so much time ?!?!"...and I have no real answer I guess. So buy it now before I come to my senses and raise the price!
Future plans for Doit! are listed here: Support Forums
You can make suggestions there as well.
So.....
HERE IS THE STORE PAGE LINK! BUY TODAY!
Inside of the package:
the Doit! files, license agreement, install directions, changelog and a short install video for lazy people. :P
Cheers and Enjoy everyone...happy exporting!
- eb
1. Early Adopter purchase price is only available until Friday(March 6th,2009) at midnight!(NY,usa time)
**Denotes that future versions should work as well.
- To use Doit!, you will need a license file in your local install. The install directions text file and the install video covers these simple steps.
------------------------------------------------
@Licensees:
Here is a macro script to allow an icon button for Doit! on your toolbar...so that you don't need to >RunScript>Doit! to show the panel.
(as usual there is a small install vid for those who may not know how)
with video(<1kb)
without video(4MB)
The Adjust_Lods.mcr can be found in this package: "torque_max_filepack.zip"
If you don't know about "Doit!"..read my last blog!
...click image to go to Doit!'s store page!...
I have stuck to my word on the Early Adopter pricing of $10indy/$20commercial. For a few days at least...I will explain...
I have been asked this by several people: "why is it so cheap when it saves so much time ?!?!"...and I have no real answer I guess. So buy it now before I come to my senses and raise the price!
Future plans for Doit! are listed here: Support Forums
You can make suggestions there as well.
So.....
HERE IS THE STORE PAGE LINK! BUY TODAY!
Inside of the package:
the Doit! files, license agreement, install directions, changelog and a short install video for lazy people. :P
Cheers and Enjoy everyone...happy exporting!
- eb
1. Early Adopter purchase price is only available until Friday(March 6th,2009) at midnight!(NY,usa time)
**Denotes that future versions should work as well.
- To use Doit!, you will need a license file in your local install. The install directions text file and the install video covers these simple steps.
------------------------------------------------
@Licensees:
Here is a macro script to allow an icon button for Doit! on your toolbar...so that you don't need to >RunScript>Doit! to show the panel.
(as usual there is a small install vid for those who may not know how)
with video(<1kb)
without video(4MB)
The Adjust_Lods.mcr can be found in this package: "torque_max_filepack.zip"
About the author
gameartstore.com
#2
Kudos
03/04/2009 (4:01 pm)
haha nice! I just might buy this, ive been looking for a good exporter. Whats great about it is that it does the mesh's for you. Ice always hated that process :)Kudos
#3
03/04/2009 (4:45 pm)
Me likey.
#4
@Everyone:
After purchase, you will be sent to a page with a download link.
Please let me know if you missed this page. The 'buys' and 'downloads' are off by 1.
03/04/2009 (4:51 pm)
;)@Everyone:
After purchase, you will be sent to a page with a download link.
Please let me know if you missed this page. The 'buys' and 'downloads' are off by 1.
#5
Thanks ... just bought my copy. :)
Would just like to say ... awesome job. I just went through your quick instruction videos ... loaded in the model that was giving me some headaches last night ... did the export ... and viola ... everything worked.
Awesome job. :)
03/05/2009 (4:22 am)
Just last night I was getting frustrated with my Max Exporter and started cursing it ... now you bring me this.Thanks ... just bought my copy. :)
Would just like to say ... awesome job. I just went through your quick instruction videos ... loaded in the model that was giving me some headaches last night ... did the export ... and viola ... everything worked.
Awesome job. :)
#6
03/05/2009 (6:30 am)
Thanks for the feedback Quinton! 
#7
03/05/2009 (6:37 am)
so how long do I have to wait for the download link email? I just purchased.
#8
Please send me an email from the email used to purchase Doit! and I will reply with your link.
03/05/2009 (6:44 am)
..the link is shown after purchasing on the page to which you are redirected. Please send me an email from the email used to purchase Doit! and I will reply with your link.
#9
03/05/2009 (6:53 am)
eric, sent to you.
#10
03/05/2009 (7:19 am)
thanks for the dl link, sent you for the licence key. 
#11
So I did not get to download it.
03/05/2009 (7:43 am)
@eb, I purchased it, but I was never redirected to any other pages.So I did not get to download it.
#12
Interesting...I will email you a link John.
Sorry for the trouble, I will look into what may have happened.
@Licensees:
Here is a macro script to allow an icon button for Doit! on your toolbar...so that you don't need to >RunScript>Doit! to show the panel.
(as usual there is a small install vid for those who may not know how)
with video(<1kb)
without video(4MB)
Cheers,
eb
03/05/2009 (7:52 am)
@John:Interesting...I will email you a link John.
Sorry for the trouble, I will look into what may have happened.
@Licensees:
Here is a macro script to allow an icon button for Doit! on your toolbar...so that you don't need to >RunScript>Doit! to show the panel.
(as usual there is a small install vid for those who may not know how)
with video(<1kb)
without video(4MB)
Cheers,
eb
#13
If you click that link you will get redirected to your download link page. :)
Well at least thats how I did it.
03/05/2009 (8:00 am)
@all When you pay through PayPal a link appears afterwards saying: "Return to Vendor" or something like that ... I almost missed it as well the first time.If you click that link you will get redirected to your download link page. :)
Well at least thats how I did it.
#14
Paypal is supposed to automatically redirect you to the download page.
If you have any trouble or never get to the download page, just email me.
03/05/2009 (8:07 am)
Thanks again Quinton. Paypal is supposed to automatically redirect you to the download page.
If you have any trouble or never get to the download page, just email me.
#16
I replied to the email you sent...so it went to your hotmail.
03/05/2009 (8:40 am)
I sent it an hour ago. I replied to the email you sent...so it went to your hotmail.
#17
03/05/2009 (9:18 am)
damn, I gotta stop that interlinking with my emails!!! thanks eb, got it
#18
03/05/2009 (9:33 am)
how much is the program after the early adoptor?
#19
You can suggest a price if you want...but don't forget to think of the future plans I have for Doit!. Also, remember that whatever you say is just a suggestion. ;)
03/05/2009 (10:13 am)
TBH, I am not sure yet. ..the question I have to ask myself is, how much is it worth to save the user some time. I don't want to over-price it and I don't want to under-price it. I want to remain fair. ;)You can suggest a price if you want...but don't forget to think of the future plans I have for Doit!. Also, remember that whatever you say is just a suggestion. ;)
Torque Owner Brian -Cybore- Smith
Hostile Ai